Идет загрузка...
Сегодня:  Вторник, 18 Мая, 2021 года


The following table offers a typical demonstration

05:28, Среда, 12 Августа, 2020 года
The following table offers a typical demonstration

The parallel gate valve utilizes a flat disc gate between two parallel seats, upstream and downstream. Shut-off is obtained from the free-floating seat or disk gate encourage the upstream pressure to seal the seat and disk against any Gate Valve at stvvalves unwanted seat leakage. Some parallel gate valves are designed to let the seat to become spring-energized by an elastomer that applies constant pressure towards the disk gate seating surface.


Various kinds of materials bring gate valve construction. Typical common materials used are cast carbon steel, certain, ductile iron, gunmetal, bronze, alloy steels, stainless, and forged steels. Brass and PVC gate valves can be used for plumbing services. The material selection for gate valves primarily will depend on fluid service as well as design temperature. The following table offers a typical demonstration of common materials employed in Gate valve construction.


Consists of two discs which might be forced apart against parallel seats with a spring with the point with the closure, the most famous type will be the knife gate carries a flat gate between two parallel seats (an upstream along with a downstream seat) . To achieve the required shut-off. the effective use of parallel-gate valve is fixed to low pressures and low-pressure drops.


The solid, or single wedge is easily the most widely used and also the lowest cost used-type inside the process industry. The purpose with the wedge shape should be to introduce an increased supplementary seating load. Solid-Wedge Gate May be positioned in any position, Suitable for most fluids, Practical for turbulent flow.


Wedge gate valves are often used where doesn't have any strict requirements on the size in the valve and harsh occasion. Such as temperature and high-pressure working medium, the prerequisites to ensure the closure in the long – term sealing conditions. Normally, for that environment with reliable sealed performance, ruthless, high-pressure cut-off (differential pressure) and low pressure because of the (small) differential pressure, low noise, have spirit point and evaporation phenomena.

Продвижение этого поста

Не нравится
| | |
1363 | 0 | 0