Խնդրում ենք սպասել...
Այսօր`  հինգշաբթի, 24 սեպտեմբերի, 2020 թ.

Հոդվածներ

What it will likely be used for

Calvin
Հեղինակ`
Calvin
07:12, երկուշաբթի, 10 օգոստոսի, 2020 թ.
What it will likely be used for

The ball valve is a component of the quarter-turn valve family. It only takes a 90-degree turn because of it to open or close. The ball valve at https://stvvalves.com/ design includes a hollowed-out ball that acts since the disc that enables the flow of media. Mostly for non-slurry applications, ball valves will also be suited for applications that want tight shut-off. The quick opening and closing on the ball allow it to be important in some applications which need media isolation. Ball valves are usually used in low-pressure applications. In a nutshell, ball valves are perfect for control and treating media with minimal pressure drop.

Before selecting your valve, you will have to determine what it will likely be used for. Will it be familiar with regulate a fluid or stop its flow?It is then required to verify the media that can circulate from the system: would it be a gas or even a liquid? Is the media corrosive, chemically neutral, a food product or possibly a medical fluid that will require special hygiene conditions?

When you are looking for the operation system on the valve it is very important know be it powered manually or automatically. In one case, someone has to be on-site to control the valve, while from the other case the valve may be operated remotely, from the control station as an example.

Consists of two discs which might be forced apart against parallel seats using a spring for the point from the closure, the most famous type would be the knife gate features a flat gate between two parallel seats (an upstream along with a downstream seat) . To achieve the required shut-off. use of parallel-gate valve has limitations to low pressures and low-pressure drops

The solid, or single wedge is among the most widely used as well as the lowest cost used-type inside the process industry. The purpose in the wedge shape is always to introduce a higher supplementary seating load. Solid-Wedge Gate May be positioned in any position, Suitable for virtually all fluids, Practical for turbulent flow.

Wedge gate valves are usually used where doesn't have a strict requirements in the size on the valve and harsh occasion. Such as temperature and underhand working medium, the needs to ensure the closure on the long – term sealing conditions. Normally, with the environment with reliable sealed performance, underhand, high-pressure cut-off (differential pressure) and low pressure from the (small) differential pressure, low noise, have spirit point and evaporation phenomena, the warm, low temperature, cryogenic medium, it is suggested to use wedge gate valve such as being the electric power industry, oil refining.

Առաջխաղացնել այս նյութը
Տեղեկացնում ենք, որ նյութը հրապարակվել է "Մամուլի խոսնակ" նախագծի շրջանակներում:
Գրանցվի՛ր և հրապարակի՛ր քո հոդվածները:
Հավանել
0
Չհավանել
0
| | |
906 | 0 | 0
Facebook
COMMENT.am