Խնդրում ենք սպասել...
Այսօր`  հինգշաբթի, 01 հոկտեմբերի, 2020 թ.

Հոդվածներ

These valves should be employed for the applications

Calvin
Հեղինակ`
Calvin
10:30, ուրբաթ, 07 օգոստոսի, 2020 թ.
These valves should be employed for the applications

The open/close flow is achieved by moving the gate into or out of the fluid-flow stream. The flow on the fluid over the valve might be in either direction. Gate Valve like stainless steel sight glass is often used in refineries and petrochemical plants where pressure is low, and less utilised in upstream facilities because of high operating pressure, long on/off times (requiring many turns on the handwheel to spread out it or even close it), and severe environmental conditions.

A full port valve comes with a full line size thus produces a minimum-flow pressure drop, On the other hand, A Reduced port less space-consuming than the line size (Flow area under the pipe) results in a slightly high-pressure drop when compared to a full port.

There are lots of industrial valves you can find. Different industrial valve types function differently. Some regulate the flow of media although some isolate media. Others control the direction with the media. These also vary in design and sizes.

Two from the most common valves employed in industrial applications are ball valves and gate valves. Both are seen to provide tight shut-off mechanisms. This article will compare the 2 valves in numerous factors for instance working mechanisms, designs, ports, and so on.

Wedge gate valves are comprised of the tapered gate that is certainly metal-to-metal sealing. Compared with a slab gate valve, wedge gate valves will not be piggable because in the void that is certainly left from the bottom on the valve body once the valve is open. The wedge design enhances the auxiliary sealing load, enabling metal sealed wedge valves to seal at both high and low medium pressures. However, wedge gate valves with metal seals will often be unable to obtain the inlet seal because of the specific pressure with the inlet seal brought on by the wedge action. Wedge gate valves have a very certain Angle, generally, 3 degrees or 5 degrees, producing accumulated material from the lower groove on the valve, the medium with all the particulate matter damages the sealed seat, make loose closure.

Knife gate valves possess a very high level of suspended liquids. It is mainly useful for on – off and isolation services in systems. Knife valves work most effectively suitable for doing work in some with the harshest environment. These valves should be employed for the applications which have to have a completely open or completely closed position.
    
     Brass gate valves would be the perfect fit with the applications where corrosion can be a serious concern. It is viewed as the most durable gate valve. It has a high capacity to tolerate high temperatures in addition to high pressure.

Առաջխաղացնել այս նյութը
Տեղեկացնում ենք, որ նյութը հրապարակվել է "Մամուլի խոսնակ" նախագծի շրջանակներում:
Գրանցվի՛ր և հրապարակի՛ր քո հոդվածները:
Հավանել
0
Չհավանել
0
| | |
2750 | 0 | 0
Facebook
COMMENT.am